Your cart is empty
Visit The Shop

Music on CD Baby

Christopher J: Give Us Peace

Chris Hartzog: Lost In Your Arms of Love

Ways to Connect


RMC Hex Pickup and Poly-Drive Install for Roland GR-55 Synth Access

Here’s my recap of my process of upgrading my Ibanez Artcore Expressionist AM93 semihollowbody guitar with new RMC Pow’r Bridge ‘G’ pickups in the bridge along with the Poly-Drive 1 electronics module and all new control wiring.

Watch The Video


The synth access equipped guitars on the market, for example such as those available from Godin (LGX-SA and LGXT-SA) or Carvin (Frank Gambale FG1) were very attractive to me but cost more than I wanted to spend on a guitar. Besides I love working on things so I decided to do this upgrade myself and document what I did in case anyone else wants to give it a try too. I had already had a few years experience using the Roland GK-3 external mount pickup on my Epiphone “dot”, which worked great, but it was big and ugly. Sure, beauty is in the eye of the beholder, buy in my beholder eyes I decided I didn’t like it. Also, I had moved on to the smaller body (ES-339 style) Artcore AM93 and I wanted to keep it as stock looking as possible while still being able to enjoy synth access.

Perhaps the biggest challenge was the bridge.  The RMC “PBG pickup saddles” retro-fit the Schaller GTM (Nashville) bridge as well as the TonePros TP-6 bridge, but they don’t fit in the Gotoh tune-o-matic bridges because the intonation screws are too high in the Gotohs.  The bridge in the Artcore is called by Ibanez the Art-1 bridge and I don’t know who makes it, but I took measurements and determined that the RMC pickups would not fit.  In the end, I decided to buy a Schaller GTM bridge, but the main problem was that the Schaller bridge posts/bushings were smaller than the Artcore bridge posts.  I fashioned wood plugs for the holes and drilled them out to fit the new Schaller posts.  This required very careful measuring and rechecking.  Once it was verified I glued them in with Titebond hide glue.  Be careful to wipe up any excess glue from the guitar finish!

Before beginning any work, I carefully planned what I would do. Below is a copy of my proposed control layout diagram. I couldn’t find graphic of a blank Artcore body online, so I went with this one and about the only major difference is the extra hole on the top for the ¼ inch output jack which is on the side on the Artcore.

I also did my own wiring diagram that would be specific to my particular guitar. My install included what RMC calls the “Cool Circuit” which provides a master tone, guitar volume, synth volume and RMC/Mag pickup blend control.

RMC Poly-Drive 1 Controls Layout for Ibanez Artcore AM93 Rev. 2

RMC Poly-Drive 1 Wiring for Ibanez Artcore AM93 Rev. 2



1  Bridge Post Hole Retrofit For Schaller Gtm Bridge

  1. Remove guitar strings. I discarded the factory strings as I had new D’Addario NYXL strings that I wanted to install when I was done.
  2. Remove stop bar. (It will actually slide off its posts as soon as you remove the strings.)
  3. Remove stock bridge. Set it aside until you are ready to replace the saddles with the RMC pickups.
  4. Extract stock bridge bushings. Place a short screw or bolt in the bushing hole and then tighten the bushing against the screw until the bushing lifts out of the hole.
  5. Measure bridge post hole diameter and depth.
    • ID:
    • Depth:
  6. Fabricate post hole plugs:
    • OD: 17/64”
    • Length:
    • ID of Schaller bushing:
  7. Verify Schaller bushings fit in the fabricated post hole plugs.
  8. Re-verify post hole depth and plug length:
    • Depth:
    • Plug Length:
    • Hole spacing:
  9. Install plugs and glue in place.
  10. Press in Schaller bushings.

2   Bridge Saddle Replacement

  1. Remove and replace bridge saddles with RMC saddles per RMC instructions.
  2. Remove bridge pickup and move it out of the way.
  3. Install Schaller bridge.
  4. Route pickup cables into guitar body.



3   RMC Wiring connections

  1. Remove the volume and tone knobs. Tip of the hat to Sweetwater’s Insync for the helpful suggestion to employ the tip of a spoon as a lever to pry the knob up. Be sure to protect the finish with a cloth or napkin and pry gently.
  2. Remove the nuts and washers from the volume and tone pot stems, the pickup switch and the ¼ inch jack. (Save them in case you need an extra nut or washer later.)
  3. Remove all stock wiring through bottom F-hole:
    • Volume and tone pots. (Label the pickup wires)
    • ¼” guitar jack
    • Pickup selector switch
    • Discard pots and ¼” jack.
  4. Mark and drill holes for S1 and S2.
    • Drill size:
  5. Mark and cut opening for the battery box. (Note:  it is not shown here, but I applied masking tape first over the areas where I needed to cut into the guitar to avoid chipping the nearby finish.)
  6. Mark side for jackplate opening.
  7. Make template for jackplate opening cutting/routing.
  8. Cut/route side opening for jackplate.
  9. Connect mag pickups to selector switch.
  10. Connect all Poly-Drive wires per RMC drawing.
  11. Connect mag pickup ground wires to Poly-Drive module per RMC drawing.
  12. Connect pickup selector switch to Poly-Drive module.
  13. Connect RMC pickup wires to Poly-Drive module per RMC drawing.
    • Add cable tie down to secure inside guitar.
  14. Route battery wires to battery box.


4   RMC Wiring Harness Installation

  1. Insert Poly-Drive module and ¼” jack through F-hole.
  2. Attach module with two screws and ¼” jack with nut to dual jackplate.
  3. Attach jackplate to guitar with screws.
  4. Attach all pots and switches.
  5. Connect battery wires to battery box.
  6. Secure internal wires to guitar interior.
  7. Reinstall bridge pickup.
  8. Install strings.
  9. Tune and check string action and intonation.
  10. Install 9V battery.
  11. Test all functionality:
    • S1: Changes GR-55 programs?
    • S2 = Gtr + connect ¼” to amp: Mag pickups work?
    • S2 = Synth + 13 pin to GR-55: RMC pickups work?
    • S2 = Mix: Both pickups work?
    • Guitar volume works?
    • Master tone works?
    • Mag/RMC blend works?
  12. Polish guitar.IMG_2002
  13. Create GK Set in GR-55 with setting applicable to RMC piezo pickups.
  14. Go play your guitar!


Ibanez Artcore with RMC synth Access2 Ibanez Artcore with RMC synth Access1

TwitterFacebookGoogle+Google BookmarksDeliciousEmailShare

Artcore Bliss!

My new Ibanez Artcore Expressionist AM93 (Thanks Sweetwater!) with my added RMC Poly-Drive 1 electronics (Thanks Richard McClish & RMC Pickups!) for Roland GR-55 synth access. Ahhhh…. Can’t wait to start playing it nonstop! 😎🎸

DB-14 How to Use the Metronome

Watch The Video Lesson

This is lesson DB-14 “How to Use the Metronome”, and is a continuation of my journal of things I have learned as an adult double bass student.

See the video for a few pointers about using the metronome.

Be sure to check out my Double Bass Lessons page for a complete list of all of my lessons!

Getting used to practicing with a metronome is really important. It will help improve your rhythmic abilities and improve your consistency of playing at a given tempo. And the more you practice with a metronome, you will find that you start hearing a metronome in […] Continue Reading…

Visual History of Boss FX Guitar Pedals

I thought this was pretty cool.  Courtesy of Roland UK:

MP3 for I Need You

To not hold anything back, here is an mp3 of my latest new song, “I Need You”.  You can buy the high res versions either from my web store or at CD Baby.

Thank you in advance.


Ukulele Bar Chords – F major form

Like I said, as I get the time to put these together I will share them with you.  Today’s chord du jour is the F major shape bar chord which has its root note on the second string, the E string as shown in the diagram below.  Have fun strumming!

I Need You Video

The video for my latest song, I Need You, is now live on YouTube.  You can also download it right here from my site if you prefer.


Album Art & Ringtones

I wish this could be on the cover of a 33 rpm LP, but I don’t have the budget for that and on top of that, this song is getting released as a single anyway.  But you can always dream.  So here’s the art for the cover of my new single, “I Need You”.  Also, here is a link to the I Need You ringtone taken from the song.  You can have it now for free, but in the future it will be available via my music store so you can throw some change my way.  Do you know […] Continue Reading…

New Song Coming – I Need You

“I Need You” is a love song that I came up while I went for a walk last summer.  Boom, done – all of the lyrics and the basic melody in less than an hour!  But then it has taken me since then to actually get it recorded.  For various reasons it sat in my notebook until February when I came across Graham Cochran’s Recording Revolution “One Song One Month Challenge”.  Of course the One Song One Month Challenge began in January, and by February I was already a month behind.  So, I got the song arranged and recorded by March […] Continue Reading…

Ukulele Bar Chords – A major form

Okay my ‘ukulele ‘ohana, here is my next installment of bar chords for the uke.  This one is using the open position form of the A major chord shape.  The diagram shows that you only bar the first and second strings with your first finger, but in practice I bar strings 1, 2 and 3 because that makes it easier to quickly change from for example Bb major to Bb minor.  I will share diagrams for some minor chord forms too once I get them completed.

Have you been using bar chords when you play the uke and how is […] Continue Reading…


CJ email list!

We'll never give your address to others, and we'll make sure you know about the latest news, upcoming concerts and other cool stuff.

Blog Updates

Enter your email address:

Delivered by FeedBurner

Bass Lesson Updates

Enter your email address:

Delivered by FeedBurner


  • Behind Wilson, Seattle rallies for 12-10 win over Miami | KOMO
    about 2 weeks ago
  • @Seahawks Thanks for being a class act. Seahawks players lock arms in pregame 'demonstration of unity' | KOMO
    about 2 weeks ago
  • @Seahawks IF you dis USA I'm no longer your fan! "DuPont cancels Seahawks rally over planned player protests "
    about 3 weeks ago
  • #bvd RT @Scripture_Truth: The fear of the LORD teaches a man wisdom, and humility comes before honor. -Proverbs 15:33
    about 1 month ago
  • RMC Hex Pickup and Poly-Drive Install for Roland GR-55 Synth Access
    about 1 month ago